Wall Tent Cut Size - David Ellis Canvas and Tent Products

CUT SIZE WALL TENTS

Cut Size Wall Tents are more economically designed. Seam allowance and shrinkage is not factored into the sixes described. For this reason frame usage is discouraged, and options are limited. Other than that they are constructed the same as the finished size wall tents. These tents are great for set-ups using timbers or ridge pole frames. The finished size without shrinkage is about 5% smaller. Windows and rear door can be added to these tents.

The Complete Ridge Pole, A - Frame is designed by, and dropped shipped from Cylinder Stoves. It is made with 1 3/8" tubing and breaks down to 40" lengths. The A-Frame design allows the ridge height to be adjustable and keeps the doorway free of a vertical pole. The cable truss keeps the ridge from sagging without the use of a center pole. Although in wet snow conditions a temporary support is advised.

Break down side poles are included with eye bolts for securing the top of the pole to the eve of the tent, and ground steaks are supplied for receiving the bottom of the pole. All other tent stakes are not included. I use 12" X 3/8" log spikes. This frame system works great for cut size tent but also adapts to any size tent as long as the ridge pole is long enough.

tent size	10.38oz. Sunforger	10.38oz. Sunforger Flame Retardant	weight	12.63oz. Sunforger	12.63oz. Sunforger Flame Retardant	weight
9 x 9	$
9 x 12	$
9 x 15	$
12 x 12	$
12 x 15	$
12 x 18	$
15 x 15	$
15 x 18	$
15 x 21	$
18 x 18	$
18 x 21	$
18 x 24	$
18 x 27	$

Home The Canvas Instructions Wall Tents Cowboy Tents Bedrolls Tepees Custom Canvas Chuckwagon Canvas Contacts Us